Replaced filter housing tested operation normal did not see any leaks per Randy cust is all paid for

Installed new timer and knob due to timer stripped out and not turning. Ran dryer and unit is now cycling and timer is functioning to factory specs

"Checked over unit and found water leaking from left side of unit coming from under machine, removed panel and found water dripping from filter area removed filter and found housing pin stuck and filter not sealing properly, fixed housing and filter found ice maker fill line frozen causing pressure on filter witch could have made the leaking, removed ice and cycled ice maker all operations now working to specs. Advised customer to watch unit just incase"

Replaced all led modules in unit and all lights are now working and operating normally. Checked cooling and other functions and unit is working to factory specs parts and labor covered under s-code S191AQ; dspstn on spec-tagged invntry: 1 W11683243 MODULE LED

"Checked over unit and found overlay for control peeling up and not allowing selection found rust forming on front stainless panel around breather and working its way around bottom of door, tried to clean rust off with affresh stainless steel brightener but it was to pitted. Replaced front panel and cntrl ran unit thew a wash cycle and all operations now working to specs"