Ck unit upon arrival and remove and install new dish washer Tub and install all other parts from old tub to new tub and ran cycle and monitor unit and check for leaks unit operating to normal specs

"Ck unit upon arrival and remove and install basket,GearCase,wash plate,with slider. Calibrate unit and ran agitation and spin cycle and unit is now operating to manufacturers specs"

"Tested dryer and found unit would run but never heat up, tested voltage to unit and 240v present 120v on each leg. Ohmed thermal fuses and heater finding heater bad. Replaced heater from stock and unit is now operating to specs ; used 1 WP3387747 (ELEMENT) from stock"

"Installed new outer tub and ran unit thew a wash and spin, unit is now working to specs"

"Checked over unit and found washer would not wash unit would fill up then keep sensing, noticed water leaking from bottom of unit. Found water coming from pressure hose nipple broken off unit will need new tub assembly, advised customer part was a special order and will be shipped to house asked to plz check it and let know if ok ; ordrng 1 W10371566 (Outer tub)"