"Belt is shredded, motor pulley snapped. Supports look to be ok.Quoted for motor/belt/labor approved.Replaced motor and belt. Tested unit n timed dry and tumbling fine. Verified heating fine; used 1 279827 (MOTOR), and 1 341241 (BELT) from stock"

U/i is unresponsive and top is coming free from rest of assy. Ordering u/I.; schdld next appmnt for 9/19 TUE PM

Replaced fuse and tested unit heating properly. Decent flow. Cs to keep eye on venting and keep clear.; dspstn on spec-tagged invntry: 1 DC47-00016A THERMOSTAT

Found a large amount ice ice buildup in freezer this caused the return air flow vent to be restricted causing poor cooling in refrigerator side. Cleared ice and drain. Reassembled and reset controls to normal.

"Unit is not starting as it had done before last repair. Found open fuse as was replaced previously, jumped fuse and ran, flow seems decent at outside vent. Possible bad fuse or thermostat issue but heater is cycling in testing on timed dry.Will order fuse again and suggest cleaning vents.Part/labor covered under our warranty, just service call.; ordrng 1 DC47-00016a (Fuse)"