Replaced all parts and ran two diagnostic cycles and calibration. Unit working normal. No more error codes present.

"Installed new pump, float switch and heater and control board. ; dspstn on spec-tagged invntry: 1 W11416362 MOTOR/SUMP and 1 W11537778 HEATER W/NUTS"

"Inspected and found left side ff door is rusting and corroded, explained rust and corrosion is not covered by contract company. Quoted for replacement of door and saved estimate. Customer wants estimate submitted to contract company to see if it will be fixed. Took pics of the rust and corrosion.; rqstng P&A on 1 W11435353 (Left side ff door stainless)"

Complaint that the unit is not cycling through correctly. Customer mentioned unit would randomly stop at sensing and other times it doesnt and would randomly turn off after spin cycle. Found error code F8E1 Long Fill. Found clogged water valve and during diagnostic the unit shut down twice. Check all connections and all is good. Third diagnostic cycle went through ok. Customer had the electrical outlet fix and its all brand new. No electrical issues found. Will order parts for a return trip. ; rqstng P&A on 1 W11124710 (Control Board) and 1 W11210459 (Water Inlet Valve)

Complaint that the unit is leaking water from the bottom front. Found clogged drainage. Quoted labor. Collected minor repairs.