"Installed control, tested okay calibrated unit"

"Customer states unit continues to drain at end of cycleConfirmed issue found error code for pressure sensor fault, need to order and replace control; ordrng 1 W11608056 (Control)"

Complaint customer smells something burning when using the dryer. I took the dryer apart checked the motor checked the inside took the board out. Check the relays. Nothing is burning up in the dryer. Ran the dryer no burning smell smell. The only thing I noticed was that his exhaust vent wasnt sealed properly it was escaping into the room and his lights liquor every single time the dryer cycles on and off Told him he may need to have that looked at it shouldnt be happening. Tested all ok otherwise.

Cust said was the second repair to ice maker .Cust has A reversed osmosis water filter on fridge and using the fridge filter.Explained water flow would be better if use one or other not both .Removed one in fridge tested water good . Found the ice maker started to move tilted.Replaced the ice maker .I also checked harness for breaks couldnt find any24 hours; dspstn on spec-tagged invntry: 1 W10873791 ICE MAKER

Installed part valve tested all ok