Checked unit cust could not installed bottom shelf on refrigerator door installed shelf tested operation normal

"Tested unit and found machine would not power up and no selections working, checked for voltage and found some blackening on the electric cover removed cover and found bland and white wire had fallen off of connection touching each other and killing power to unit. Cut out melted lines and reconnected properly securing, checked for proper voltage and 120v is present. Ran unit and all operations are now working to specs"

"Installed new doors and nameplate heated gasket to seal against cabinet and checked over cooling, unit is now operating normally and doors are closing and working to specs"

Replaced panel found small dent on left side after installing panel reordering panel; ordrng 1 W11625194 (Panel)

"Ran washer and found when unit would ramp up to spin it would start to squeal then stop, checked belt and found belt had stretched causing it to slip on pulley and wear it down. Replaced cam and belt recalibrated machine and all operations are now working to specs ; used 1 W11239857 (BELT), and 1 W10721967 (CAM KIT) from stock"