"Tested washer and found once plugged in console would start selecting settings and beeping out of control not allowing any selections. Ran unit threw a diagnostics cycle and machine would go in run then shut down, removed console and checked controls found front user interface corroded found main control 120v connection relay shorted and harness melted at connection. Unit is going to need new console, user interface, main control, and harness. Parts tentative p/a ; ordrng 1 WH22X34919 (Ui board) and 1 WH22X29543 (Control panel) and 1 WH22X36637 (Cntrl board) and 1 WH08X30001 (Harness main)"