Ck unit upon arrival per customer from time to Time unit user interface will show door open even though door is closed. Check and found frost build up on food products inside freezer which is a indication of room temperature air entering a cold space. Adjust legs to raise unit and give tilt and inform customer to try an make sure door is closed properly at all times

Ck unit upon arrival and found Freon stuck within the low side of the system. Install service port and use nitrogen an found all gas flowing out through capillary tube. Install other parts and pressurize and monitor pressure and pressure stable. Vacuum and charge system and monitor pressure instruct customer 24hr for proper cooling; dspstn on spec-tagged invntry: 1 W11504445 COUPLER 5/4

Ck unit upon arrival and found freezer temperature sitting at 17 degrees. Remove and check freezer evaporator and found excessive frost build up on the first 2 coils and nothing on the remaining coils. Unit has seal system issue inform customer office will contact her once parts become available 2time on return; ordrng 1 W11582579 (Compressor) and 1 W11504415 (Coupler) and 1 W11504431 (Coupler) and 1 W11506635 (Coupler) and 1 W11109499 (Drier) and 1 W11506623 (Coupler) and 1 W11504445 (Coupler) and 1 W11504447 (Coupler) and 1 2time (2Time)

Ck unit upon arrival and jump out optics sensor while optics is jump out with jumper. Jump L&V on ice make module and unit send water. Jump T&H and ice maker did not cycle. quote customer for repair and customer declined estimate for repair

Ck unit upon arrival and install infinite switch and test operation and unit now operate to manufacturers specs. Also have customer sign waiver to pull unit out to protect customer floor