Correct phone number is 351-215-5651. Complaint that the dishwasher is not draining properly. F9E1 error code. Found clogged drain line. Customer will have someone clear it out. Unit working normal.

"Replaced control and tested fine. Customer tried to run a cycle but didnt run properly. Found bad harness wire and replaced this part also. Ran diagnostic and quick cycle and all running normal. No leaks detected. Added pics of the new pressure hose properly installed.; dspstn on spec-tagged invntry: 1 W10913953 ACTUATOR , used 1 W11643701 (HARNESS LOWER) from stock"

Complaint that the washer would stop for no reason. Found error code F1E1 main control fault. LED light solid on control. Touch panel ok. 5v on control present. Found control board acting erratic. Ran diagnostic cycle and failed the first time and second time was ok. Ran it on normal and issues arise grinding noises and seems actuator not fully engaging during this normal cycle. Bad control board. Will order part for a return visit.; ordrng 1 W11513246 (Control Board) and 1 W10721967 (Splutch) and 1 W11481722 (Actuator)

Replaced infinite switch and burner heating properly.

Complaint that the ice maker has a broken piece underneath. Found broken sensor clip on the IM replaced part but will order the flapper shoot. Thats leaking warm air through the shoot. Will order part. ; ordrng 1 W11678832 (Shoot Grey)