"Inspected and found ui panel not responding and numbers scrambled, replaced with new ui panel and cycled tested fine."

"Installed parts listed and cycled, tested fine now."

"Installed new control and thermistor and cycled back on, please allow 24 -48 hours for temps to regulate."

"Clothes in washer, full of water. On arrival sink was not draining and drain hose at level of water. Raised drain hose and put unit in drain and spin. Drained out fine and went into spin fine.As was set up on arrival unit would have been backfilling washer because of the clogged sink.No errors or n history, completed diagnostic cycle fineCs say it had a F1e1 previously and another company replaced. Said it happened since, but no errors in history. If continues it will need a new control.Cs says it would occur 10 minutes into a cycle, ran unit in normal for 12+ minutes with no error."

"Installed new compressor and attempted vacuum and leak check , but when charging system there was a loud pop noise that came from compressor internally, and compressor failed, need to order another compressor and call for return day.; ordrng 1 W11557425 (Compressor) and 1 W11506635 (Coupler access port), dspstn on spec-tagged invntry: 1 W11506635 COUPLER 6 NF MS SV"