Drain pump getting power and only hums. Removed pump found it seized. Replaced and tested all checks ok. ; used 1 W11497943 (DRAIN PUMP/W CHOPPER) from stock

Installed new I trim and panel. Still getting PF measured 120vac arias each hot leg to neutral. Measured 240vac across l1-l2 will try to replace harness. ; rqstng P&A on 1 W10637535 (Main wire harness) and 1 Xtratime (Xtra time)

"Dryer will power in and after the start button pressed the control clicks and the panel goes blank and then displays PF. Tested supply power and found proper voltage. Tested under load and voltage stayed steady. All connections tight. Needs new panel and control. ; rqstng P&A on 1 W10750362 (Control panel) and 1 WPW10654005 (Control), dspstn on spec-tagged invntry: 1 WPW10298258 WIRE HARNESS"

Water not flowing properly. Found water line kinked at back. Unkinked and purged a gallon out. All checks ok.

"Found top led burnt out. Replaced both lights all checks ok. ; used 1 W10695459 (LED MODULE), and 1 W10695460 (LED SPLICE MODULE) from stock"