"Tested unit and found error 8-4 9-2 and unit beeping and running at the end of the cycle, checked float switch and found float had been clipped in wrong pushing down on float causing unit to think its over filling. Fixed float and ran unit thew a few wash cycles unit is now working to specs"

Ck unit upon arrival and plug unit back in and drain pump would continuously runs. Check and unit is covered under service pointer S-Code S153EB. Install prescreen control board and calibrate unit and unit is now operating to manufacturers specs

Ck unit upon arrival and remove and install control with pump ran unit and unit is operating to manufacturers specs

Ck unit upon arrival check error code and found F3E3 F9E1 error code order control for replacement ; ordrng 1 W11305303 (Control) and 1 W10876537 (Drain pump)

Ck unit upon arrival per customer condensation is building up on mullion liner separating freezer and refrigerator. Install gasket seal between top freezer gasket liner customer will now monitor unit ; used 2 W11159728 (Gasket) from stock