"Found F9 E1 fault for long drain. Washer would not start, found lower wire harness broken to drain pump connection. Replaced lower wire harness, cleared fault code, and tested operation of the washing machine. The washing machine is operating correctly. Job is complete.; used 1 W11643701 (HARNESS LOWER) from stock"

"Found wash motor is faulty, also Fault F7 E1 for no heat, heater and thermostat are good. Parts ordered for pre diagnosis are incorrect part numbers. I updated series # 1 for this model #. Ordering correct part numbers for sump and motor assembly, as well as an electronic control. Talked with Randy regarding parts, follow schedule for Monday 11th p.m.; ordrng 1 WPW10605058 (Sump + Motor) and 1 W10854229 (Electronic control)"

"Found gas leak at flex line gas supply from house to range, gas leak at connection to the safety valve/pressure regulator, on the home installation connection, no cracks or issues found with the pressure regulator, documented with Whirlpool tech support case# 23441555, sent over pictures. Safety case# 23417317, Safety is covering trip and diagnosis. Homeowner has been advised to replace the flexible gas line and reinstall the adapter/connection with new pipe sealant connecting the flexible gas line to the pressure regulator. Job is complete.; dspstn on spec-tagged invntry: 1 718-202-G1 COMBUSTIBLE GAS DETECTOR"

"Customer Cell# 508-863-9407. Waiting for authorization. Customer was quoted $139.00. Naomi from Schwartz says Maytag had given them a Concession #, not verified at this time. Talked with Debra in our office, waiting for concession verification before Diagnosis and repair can be completed."

"Found gear case leaking oil, and lower wire harness was broken at the capacitor connection. Cover guard was cut in to from cam pulley. Replaced gear case, lower wire harness, cam kit, shield cover and wash plate. Wash plate had to be cut off. Calibrated washing machine and tested for proper operation. The washing machine, agitates and spins properly. Job is complete."