Ck unit upon arrival and remove and install new rack adjuster order by previous technician and test operation unit now operating to manufacturers specs

"Checked over unit due to machine leaking and found oil and water on ground tipped unit up and found Gearcase leaking out oil and seal leaking water. Unit will need new Gearcase,sheild,cam,belt and motor due to covered in oil, will order all parts and advised would call when parts are in for return visit ; ordrng 1 W11454741 (Gearcase) and 1 W10890624 (Motor) and 1 W11239857 (Belt) and 1 WPW10427633 (Sheild) and 1 W10721967 (Cam kit)"

Installed new Gearcase and ran a calibration cycle unit went threw normally. Ran a wash and spin checking functions and unit is now working to factory specs

Dishwasher randomly not draining. Used shop vac and made sure hose is clear. Found nothing stuck in hose or pump. Replaced pump and tested all checks ok. ; used 1 W11412291 (DRAIN PUMP) from stock

Ice maker not working found fill tube solid with ice. Cleared away ice and found poor water flow into icemaker. Found good supply pressure. Removed filter and water started flowing properly. Recommend replacing filter or leaving it out.