Complaint that the unit is tripping the gas detector. Found bad igniter not reaching temp on a right time. Taking to long to ignite. Quoted parts and labor. Replaced part and unit running normal. With bad igniter it would take around 5to 6 minutes to get to full burn but now with new under 1min. 1yr warranty on parts and labor.; used 1 12400035 (IGNITOR FLAT) from stock

"Installed harness, UI was not needed. Found that nozzle on tub for the pressure sensor hose needed to be drilled out. Drilled out hole with the only bit I had. Found F0E5 off balance, F7E5 basket re-engagement failure. Found slider separating, will need new slider as I used my only one and have not been replenished. ; rqstng P&A on 1 W10734521 (slider)"

"Found compressor has not been on for several days. Tested for voltage to compressor, getting 120. Cooling fan is running, condenser was completely covered in thick dust. Could hear start device trying to kick compressor on. Advised customer to call LG about coverage on sealed system and a company to do the work."

"Auger motor is completely seized, will order new one as well as coupling.; ordrng 1 W11671282 (Auger motor) and 1 WPW10169511 (Coupling)"

"Installed control and pump, tested unit on quick cycle. Tested ok until cycle was cancelled to switch to drain and spin. then unit froze and is no longer functioning. Will have to order wire harness. I did check water level sensor hose and it is free and clear.; ordrng 1 W11568984 (Harness)"