"Tested unit and found fridge not making any ice ran a diagnostics cycle and checked ice maker operations found unit would cycle but not fill. Checked fill tube and found frozen, customer had gone away and shut ice maker off witch allowed water to freeze In tube, melted ice and ice maker is now filling and working to specs gave advised on running water out of unit bf shutting off"

Unit arrival on Friday and never been use. Inform customer on run time thats on the timer with first installation. Per instructions on the dryer tagged. After starting unit customer should open and close door without start and let the time on the timer expire per tagged which can take any where between 45Mins to 8hr. Customer had unplug unit when he realize unit was still running. Customer will let unit sit while plug on to let manufacturers time run off

Ck unit upon arrival and per customers unit has not frosted up sense recent repair when parts was order. Customer is on the fence with replacement of parts unsure if issue will happens again. Customer will hold on to parts. Unit is operating as design by manufacturers

Ck unit upon arrival and per customer unit had started beeping with door indicator light on saying door open. Check voltage at switch and found proper voltage. When press and depress switch lights go on and off. Unable to duplicate issue customer is having

Ck unit upon arrival and found drain pump running constantly order control board for replacement. Inform customer office will reach out once parts comes in ; ordrng 1 W11608056 (Control)