Ck unit upon arrival and found unit making loud noise during the spin cycle. Remove front panel and found rusted water underneath tub also found bellow torn with other parts thats damage that customer had a concern about. Found faulty Bearings Bellow is NLA. Customer will look into purchasing new unit

Ck unit upon arrival and found no operation from unit check voltage and jump out all sensors and found unit kicks on when thermal fuse is jump out/bypass. Install thermal fuse from truck stock and unit is now operating to manufacturers specs ; used 1 Wp3392519 (Thermal fuse) from stock

Ck unit upon arrival per customer from previous visit unit had started making ice and cooling and eventually got warm once again check and found compressor hot to touch and cycling off. Seal system covered parts and labor 5yrs. order seal system parts for replacement ; ordrng 1 W11557425 (Compressor) and 1 W11506635 (Valve) and 1 W11109499 (Drier)

"Ck unit upon arrival arrival ran calibration on unit and found unit operating ran quick wash on Tap Cold and found no water coming into unit disconnect water line and found no cold water coming up but customer is getting hot water, customer stated issue had started right after some plumbing work was done down stairs. Customer will correct issue to get cold water up to washer"

Ck unit upon arrival per customer unit making a slight noise when rotating. Noise customer is refer to is the unit does 1 tumbled during each rotation inform customer its normal operation