"Unit was disconnected on arrival, cs had replaced with new unit, disconnected new unit and installed this one for testing.F0e5 only error in history, over filled, cleared history and ran diagnostic cycle. Unit is turning whole tub in agitation. Replaced cam and actuator. Recalibrated and ran test fine.; used 1 W10721967 (CAM KIT), and 1 W10913953 (ACTUATOR) from stock"

"Per techline, replaced drier added connector to process tube. Put unit in vacuum and held for 8 minutes fine. Charged with 4.75 oz r134a as per techline. Pressures good and return lines hot. Im moving drier to put in back cover joint broke. Repaired leak and repeated vacuum,charging and running unit. Running fine and no knocking heard during this visit, before or after repair.; dspstn on spec-tagged invntry: 1 WPW10143759 FILTER DRIER UV"

Replaced spray arms and verified both rotating wheels in normal cycle

"New door icemaker does the same, self test not functioning, disconnecting/connecting harness results in icemaker moving slightly a couple times and then nothing.Also has had another failure of craft icemaker, had jammed again, not releasing cubes, once cleared ran test and filled fine, not over filled.Quoted for craft icemaker, control and harness.; ordrng 1 AEQ73449910 (Craft icemaker) and 1 EBR32881201 (Pcb main)"

"New door icemaker does the same, self test not functioning, disconnecting/connecting harness results in icemaker moving slightly a couple times and then nothing.Also has had another failure of craft icemaker, had jammed again, not releasing cubes, once cleared ran test and filled fine, not over filled.Quoted for craft icemaker, control and harness.; ordrng 1 AEQ73449910 (Craft icemaker) and 1 EBR32881201 (Pcb main)"